CHEPCLUB.com

2/20/2018

I recently launched a 2nd website to support my YouTube Channel and Patreon supporters. The channel hosts all my Video Playlists and features my latest Filament Friday 3D printing video on the main page.

The site has subscriptions level from free to $10/month. You can get all the details at the Join CHEPCLUB page.

This elproducts.com site is setup to support my books and any past electronic projects I wanted to share. CHEP CLUB is a way for me to share the 3D printing projects, CNC projects and some future electronic projects. The cost of the different levels are what keeps me going with all this information.

I am still working on books for C programming and even some BASIC programming so those will be hosted and supported here.

I also share any files such as 3D print files, CNC Easel files, Tinkercad design source files and even some electronic schematics an board layout files will be shared in teh files section of CHEP CLUB.

So if you are interested in 3D Printing, Electronics or Hobbyist CNC then check out my YouTube channel and also register at CHEPCLUB.com.

7 Comments

best dissertations link

3/27/2018 05:33:45 am

A number of electronic products are available that will make your work and life easier. These will help you read book at a time. I really appreciate the blog that shares such valuable information about the electronic products.

kingsidorak link

6/24/2019 09:36:04 am

Hey Chep,

I print Lego Technic Pieces that I design for fans but I have always had problems printing .6mm and similar detail cutouts on the bottom of the model with FDM printers. A lot of these parts are heavily reliant on orientations so I can't just flip the model around and everything be fine. What are some things I can do to improve this?

Ender 3 stock with small upgrades
-Sid

plastic mould link

9/11/2019 10:51:20 pm

Thanks for your sharing.

obat pembesar alat vital link

9/16/2019 08:10:17 pm

Thank you for sharing in this article I can a lot and could also be a reference I hope to read the next your article update

Ghulam Mohyudin link

2/28/2020 10:50:14 pm

This was really interesting to read! I love the range of post, there is really something for everyone. Thank you for sharing your suggestions too, great post!

Greg Boyer

11/10/2022 12:00:05 pm

I am having a really bad time trying to log into your website. Original password was not recognized and a reset did not reset. I have tried to re-register and get an "email in use" message. I tried to use the contact link and it won't allow use unless logged in.......Catch22? Sorry for the bother.

rick r

3/6/2023 08:54:57 pm

i bought the e level circuit board and found that it was not as advertised. i get better leveling and print by using a feeler gauge 0.20.
on my ender 3.
i thought it was going to save time. i was disappointed with this purchase. In my opinion, the 20 second delay between adjustment point using the gcode is not long enough.

CHEPCLUB.com

Leave a Reply.

Categories

Archives

About Chuck

Disclaimer