For my latest YouTube Channel Video / 3D Printed Project, I created a replacement flag for my Rubbermaid mailbox. This mailbox is super strong and has lasted a long time but the flag design is the weak point. It can break-off easily especially when snow gets deep on top and someone tries to clear it off, often breaking the flag.
So I put TinkerCad to work and designed a replacement. I got the dimensions from the shaded outline left from the sunlight on the box. I designed it to snap in place but be tight enough to hold any position. Check out the details in the video below.
Overall the design worked great. I actually made three prototypes. Each worked fine but I made minor improvements to end up with the one in the video. These things are hard to find so I may make them available for purchase somewhere for those that don't have a 3D printer. The .stl file is available at my Thingiverse page.
Advertise here for only $25 per month. 170x50 pixel add with graphics (similar to Howtronics above).
Contact us at our contact form for more detail.
Visit previous blog posts in the archives below.
Chuck has been programming with PIC Microcontrollers since there were only five devices. Now there are over 700 and growing. He also has a lot of fun 3D printing designs using his Davinci 3D printer and TinkerCad software. In this series of blog posts and occasional videos on his YouTube Channel he tries to help you get started with electronics and 3D printing.
- Chuck's Blog
- YouTube Channel
- About Chuck
- 3D Printing
- Getting Started with PICs
- Build Your Own PICKit 2
- CHIPAXE Breadboard Modules
- Understanding Hex Files
- Newsletter Archive
- Retired Designs
- Kickstarter Projects
- Great Cow Basic Site
- Buy Hardware
- Links I Recommend